There are some special requirements when you connect to the trailer. Check them out!
- You will need the PLC Adapter cable (Part Number: JDC 112A) if you wish to perform diagnostics on a standalone trailer without needing to connect it to the tractor to provide a power supply.
- You also may need the PLC Power Supply Adapter Cable (Part Number: JDC40AM2, recommended).
1. Connect the PLC Adapter cable and 9-pin green connector to their corresponding slot.
2. In the software, choose the black 9-pin connector button to proceed.
- Jaltest Software will perform an automatic scan of the ABS system of your trailer and provide the necessary information, depending on the ABS system.
- Watch the video below to learn more.
If you need further help, reach out to us via email at Sales@yourmachinediagnostics.com.